Knowledgebase
Maestro Wireless Solutions > Support - Maestro Wireless Solutions > Knowledgebase

Search help:


How to upgrade/reinstall SmartPack on the M100 series modem 3G, CDMAPlus and CDMA485

Solution

How to upgrade/reinstall SmartPack:

 (You may use the terminal program of your choice, or download TeraTerm*)

Command: ATI3 (Verifies current firmware version)

Example: R7.53.0.A3.201501301110.SL3010T Rev 1.0 1852436 013015 11:10

Command: AT+WOPEN=0 (Modem will disconnect and reboot, reconnect via Tera Term**)

Command: AT+WOPEN=3 (Erases SmartPack settings, modem should respond with OK, but might error out if you are following this entire document no problem**)

Command: AT+WOPEN=4 (Erases the complete application, modem will disconnect and reboot**)

Command: AT+WDWL (Triggers Downloader)

Wait for the following to display: +WDWL: 0 (Modem will disconnect and reboot**)

 

In TeraTerm go to: File > Transfer > X-modem in (Check the 1K radio box) then send the file: 

M100CDMAplus_SmartPack_v22_SL3010T_R753_160316.dwl

After file is sent, reboot the modem with command: AT+CFUN=1**

After modem reboot and reconnect, run command: AT+WOPEN=1 (This opens the application, modem will reboot again**)

Verify correct version of SmartPack with command: AT+VAFV it should now read:

Example: M100CDMAplus_SMARTPACK_v22_SL3010T_R753_160316

 

WARNING: This will wipe out any current configuration. You will need to reconfigure custom settings

*Download resources:

TeraTerm= http://download.cnet.com/Tera-Term/3000-20432_4-75766675.html

SmartPack For M100CDMA=http://update.maestro-wireless.com/M100/m100cdmaplus/ 

SmartPack For M1003G=http://update.maestro-wireless.com/M100/m1003g/

(Use the SmartPack version that corresponds with your firmware, example: SmartPack_v22_SL3010T_R753_160316.dwl for 7.53.) 

 

**Reconnecting quickly with TeraTerm:

Disconnect COM port (Shortcut ALT+I, ENTER)

Re-open the COM port (Shortcut ALT+N, ENTER)

 

Video:

 


What can I use this article for?

Use this KB article if you are receiving SmartPack errors, or want to upgrade your SmartPack to the latest version.


 

 

 
Was this article helpful? yes / no
Related articles How to reset your modem configuration to default
M1003G – Road 7.53
M100 3G on Linux
Switching from SmartPack-WIPSoft Command
SMS truncated when sent by an external host
Article details
Article ID: 41
Category: Modem & Gateway
Date added: 2016-05-10 14:18:04
Views: 1322
Rating (Votes): Article rated 5.0/5.0 (4)

 
« Go back

 
Powered by Help Desk Software HESK, brought to you by SysAid