Knowledgebase
Maestro Wireless Solutions > Support - Maestro Wireless Solutions > Knowledgebase

Search help:


A5100-A Outputting in GNRMC instead of GPRMC

Solution

 

A5100-A Outputting in GNRMC instead of GPRMC.

 

Scenario: Module(s) are outputting in GNRMC and should be GPRMC

 

To be able to get the multiple constellation, you should switch the A5100 in OSP mode, by sending command:
A0 A2 00 0E DE 10 00 00 00 00 00 23 00 00 00 00 00 00 01 11 B0 B3 which means GPS+GLONASS 

Then switch back to NMEA with command:
A0 A2 00 18 81 00 01 01 01 01 01 01 05 01 01 01 01 01 00 01 00 01 00 01
01 01 C2 00 01 58 B0 B3


Now, in NMEA you can turn OFF all protocols except the RMC with:

GGA 0ff:
$PSRF103,00,00,00,01*24

GLL 0ff:
$PSRF103,01,00,00,01*25

GSA 0ff:
$PSRF103,02,00,00,01*26

GSV 0ff:
$PSRF103,03,00,00,01*27


VTG 0ff:
$PSRF103,05,00,00,01*21

ZDA 0ff:
$PSRF103,08,00,00,01*2C

All these steps can be done by using the SirfLive software.


*Download resources:

SirfLive software


What can I use this article for? 

Switching the A5100 into OSP mode and back to NMEA mode.
Turning OFF all protocols except the RMC.
Downloading the 
SirfLive software.

 
Was this article helpful? yes / no
Related articles Patch Upgrade
Activate 5Hz mode on SSIV based modules
SirfLive and GPS Cockpit download
Installing Maestro Configuration Software ?
Activating the Verizon M100 CMDA485 and CDMAPlus (not pulling IP)
Article details
Article ID: 46
Category: GPS Module
Date added: 2016-06-02 03:04:57
Views: 623
Rating (Votes): Article rated 5.0/5.0 (2)

 
« Go back

 
Powered by Help Desk Software HESK, brought to you by SysAid