Knowledgebase
Maestro Wireless Solutions > Support - Maestro Wireless Solutions > Knowledgebase

Search help:


» Category: Modem & Gateway  (Go back)

» Articles in this category:

 
What is the official DOTA FTP server ? Article rated 3.1/5.0
Official Maestro Wireless Solutions FTP server for: Application DOTA Firmware package download is: URL: ftp.maestro-wireless.com Port: 21 User: dota Password: maestro Link to use it ...
3 GIR Upgrade Application Note Article rated 3.9/5.0
3 GIR Upgrade Application Note with change of configuration on DYDNS only for NO-IP server.
Activating WYLESS SIM Card Article rated 3.9/5.0
To Activate your WYLESS SIM card just follow this link www.Wyless.com/Maestro using the Maestro-Wireless Password: Maestro2012 (case sensitive) and completely fill all necesarry fields.
AT Commands Interface Guide for Firmware 7.46 Article rated 4.1/5.0
AT Commands Interface Guide for Firmware 7.46 
Firmware & Application disambiguation Article rated 3.0/5.0
When communicating and in documentations: Firmware refers to OpenAT OS and Firmware. For example Firmware R7.45 on our M100evo refers to the Sierra Wireless OpenAT OS v2.35, Firmware R7.45 for WMP1...
How to upgrade/reinstall SmartPack on the M100 series modem 3G, CDMAPlus and CDMA485 Article rated 5.0/5.0
How to upgrade/reinstall SmartPack:  (You may use the terminal program of your choice, or download TeraTerm*) Command: ATI3 (Verifies current firmwa
M100 3G on Linux Article rated 4.0/5.0
Section 1 - Drivers For Linux kernel version <=3.0, please use the guidelines and drivers provided by directly by Sierra support team:
Installing Maestro Configuration Software ? Article rated 3.3/5.0
Maestro Configuration Software: download here, info page on http://www.maestro-wireless.com/configuration-software
Switching from SmartPack-WIPSoft Command Article rated 3.9/5.0
From SmartPack version 097a user can switch between SmartPack and WIPSoft : AT+SPMODE=0 run SmartPack (default) AT+SPMODE=1 run WIPSoft     Please find WIPSoft AT command guide attached...
AIR Prime Q26 Elite User Guide and AT Command Manual Article rated 3.4/5.0
AIR Prime Q26 Elite User Guide and AT Command Manual
SMS truncated when sent by an external host Article rated 3.4/5.0
This can happen when an external host (PLC, computer, etc.) is driving the modem using AT commands to send SMS. Only part of the SMS is received, and sometimes the modem locks-up when sending the SMS....
From Data Mode to Command Mode Article rated 3.7/5.0
1. wait 1 second for no data from and to M100 serial port 2. enter '+' to M100 3. wait for 100ms 4. enter '+' to M100 5. wait for 100ms 6. enter '+' to M100 7. wait for 1 second 8. if M100 go t...
USB to RS232 converter Article rated 3.9/5.0
Please note that some USB to RS232 converter from the manufacturer 'Prolific' doesn't work well with our M100evo Series.
DynDNS with 3GIR version 3.4 and below Article rated 3.4/5.0
An issue  is present with No-IP.org on the 3GIR DynDNS menu.   Work around:Select the ownDNS in the drop down menu.Put your host name under Alias. Then enter dynupdate.no-ip.com in th...
Heritage update package Article rated 3.4/5.0
Install Tera Term from http://en.sourceforge.jp/projects/ttssh2/releases/ Connect your Heritage modem, go to File "New connection" and select the right COM Port you have. Go to Setup "Serial ...
AirVantage Management Services Article rated 3.4/5.0
Register a M1003G Type is SL808xT, where x is the last digit of your M1003G SKU (i.e. in the USA it is M1003GXT00, so select SL8080T) Serial number is the answer from AT+WMSN command IMEI is the ...
Activating the Verizon M100 CMDA485 and CDMAPlus (not pulling IP) Article rated 5.0/5.0
Activating the M100 CDMAplus and CMDA485 on the Verizon network.  
USB powered M1003G Article rated 5.0/5.0
All of the following point concerns 5V power supply: 1)    Rated current of 650mA is our power supply recommendation, i.e. this power supply is safe and has margin for maximum current ...
M1003G – Road 7.53 Article rated 5.0/5.0
M1003G – Road 7.53
How to reset your modem configuration to default Article rated 1.8/5.0
To perform a complete reset your will need to enter the following command. Those will stop the application, erase the configuration memory, and restart the application as factory default. AT+WOPEN=0 ...
SmartPack Automatic connection APP NOTE Article rated 3.7/5.0
This application notes covers the process of using the Maestro modems to setup automatic TCP or UDP connections. This is applicable to the M100 Series and Maestro Heritage.  When used in a...
Upgrade to R7.53.1, voice issue or full serial signaling Article rated 5.0/5.0
Once you've upgraded your M1003G to R7.53.1 it may have some firmware parameters to be fine tuned. See below; 1) Enable the HW DSR/DTR/DCD supports after upgrade: AT+WHCNF=8,1,2,1,1,1;&W 2) Chec...
AT Commands Interface Guide for Firmware 7.52 Article rated 3.7/5.0
AT Commands Interface Guide for Firmware 7.52 
Make output pin high when M1003G receives SMS Article rated 3.7/5.0
Cell Broadcast Messages (M1003G and M100CDMA) Article not rated yet
Setting Dial Up Connection in Modems Article rated 3.7/5.0
In order to use modem to access internet, the following are the requirement: 1. A working SIM card with access to internet 2. APN of the SIM Please find the attached document and follow the procedu...
M100 3G and M100 CDMA USB drivers Article rated 5.0/5.0
Below are the available drivers for the M100 3G and the M100 CDMAPlus Modems Please note, the drivers are only compatible with Windows XP and Windows 7 currently. For Windows 10 driver installation c...
 

 
Powered by Help Desk Software HESK, brought to you by SysAid