Knowledgebase
Maestro Wireless Solutions > Support - Maestro Wireless Solutions > Knowledgebase

Search help:


» Category: Router  (Go back)

» Articles in this category:

 
Upgrading the firmware on the Maestro E200 series router Article rated 3.0/5.0
How to upgrade the firmware on the E200 series router
SSH Access E200 Series Article rated 5.0/5.0
System > Administration > SSH Access the E200 integrate Dropbear which offers
Sending AT Commands E200/E220 series Article rated 5.0/5.0
If you want to send AT commands to the router, you will need to SSH in. More info here: SSH ACCESS E200 Series.
DynDNS (Fixed Hostname with dynamic IP address). Article not rated yet
How to fix the hostname of your router while having a dynamically changing IP address. DynDNS (Dynamic Domain Name Server) 
Use WAN as LAN2 on E220/E200 Device Article rated 3.4/5.0
Firmware Requirement: v2.2.0 RC8 and above Please follow the procedure mentioned below in order to make the WAN port work as LAN2: Network > Load balancing > Configurat
(LUCI) Port forwarding overview E200 series routers Article rated 3.3/5.0
Open LUCI from the router IP, typically http://192.168.1.1
 

 
Powered by Help Desk Software HESK, brought to you by SysAid