Maestro Wireless Solutions
            Knowledge Base Maestro Wireless Solutions Routers

            GPIO(s) on the E220 Series Router

            From the SSH you can edit the value in the corresponding GPIO/Value folder (Value= 1 or 0).

            GPIOS:
            GPS: gpio 67 out
            HL: gpio 34 out
            GSMUART: gpio 67 out
            GPSUART: gpio 23 out
            DI1: gpio 30 in
            DO1: gpio 32 out
            DI2: gpio 31
            DO2: gpio 62
            LEDS: 27, 26, 28, 29, 25, 24, 72

            Main file location: /sys/class/gpio/
            Location and example of editing GPIO32 ( /sys/class/gpio/gpio32/value ):
            • Command to change value to 1: echo 1 > /sys/class/gpio/gpio32/value
            • Command to change value to 0: echo 0 > /sys/class/gpio/gpio32/value


            Please note: The complete directories do not get created until you check "enable" in events management. 



            Updated: 04 Oct 2018 12:06 PM
            Helpful?  
            Help us to make this article better
            0 0